CrossCutSelect
CrossCutSelect

CrossCut Select

PRIME SOURCE LLC

CrossCut Select

CrossCut Select is a selective herbicide that successfully controls unwanted trees and brush, as well as emerged annual and perennial broadleaf weeds. Its adaptable formulation can be used during warm or cool weather conditions as well as become rain-resistant within two hours of application.

As low as $44.70
Only %1 left
SKU
CrossCut Select product page
Min : 44.7 - Max : 44.7
+ -

CrossCut Select, manufactured by Prime Source LLC, is a selective post-emergent herbicide that contains 2,4-D 34.40% and Triclopyr 16.50%, which kills the hardest to control plants by interfering with their growth leading to the treated plants death.

This versatile product can be applied with any type of sprayers from hand-held models to tractor mounted spray rigs.

CrossCut Select makes spray mixing easier by recommending two rates, where the higher rate can be used for tougher, established broadleaf weeds like cocklebur or when lawns are completely dormant.

Tools Needed

To apply CrossCut Select, you will need a pump sprayer, backpack sprayer, or spray rig. We recommend using a 4 gallon backpack sprayer since most applications will need to be made with at least 4 gallons of water.

How to Use

Backpack Sprayer

  • Step 1: Determine how much CrossCut Select to use by measuring the square footage of the treatment area. To do this, measure the length and width of the treatment area in length and multiply together (length X width = square footage). To find acreage, take the square footage and divide it by one acre 43,560 (square footage / 43,560 = acre). The application rate for spot treatments is 1.33 to 5.33 oz. of CrossCut Select per 1,000 sq. ft. For aerial and ground broadcast applications for small weed, use 1 to 4 quarts of product per 10 gallons of water per acre. Broadcast applications for deep rooted perennial and susceptible woody species, apply 4 quarts of product per 30 gallons of water per acre. Do not apply more than 4 quarts per acre per application per year. Refer to the label for application rates of specific foliage.
  • Step 2: Fill your sprayer halfway with the required amount of water, add the measured amount of CrossCut Select, and then fill the sprayer the rest of the way with remaining half of water. Close the lid to sprayer and shake to ensure an even mix.
  • Step 3: Apply CrossCut Select on a fan-spray setting as a broadcast or spot application to the top and bottom of targeted weed leaves. Wait until 24 hours have passed before watering with an inch of irrigation.

Where to Use

CrossCut Select is meant for application on rangelands, permanent grass pastures, conservation reserve program (CPR) acres, commercial turf and sod farms, fence rows, non-irrigation ditch banks, roadsides, specified non-crop areas, and industrial sites.

Do not use on bentgrass, crops, timber, or other plants being grown for sale or other commercial use, or for commercial seed production, research purposes, newly seeded grass, non-cropland, fence rows, non-irrigation ditch banks, roadsides, industrial sites and similar non-crop areas.

When to Use

Use CrossCut Select when weeds first appear or when they are in the rosette stage. For best results, apply in early spring or fall when weeds are actively growing and not yet established. Avoid application during high wind speeds and near freezing weather.

During the season of application, withdraw livestock from grazing treated areas at least 3 days before slaughter. For non-slaughter animals such as dairy animals, do not allow them to graze from the area until the next growing season following application of this product.

Safety Information

CrossCut Select is safe to use around children or pets when applied according to the product label instructions. Always wear the appropriate personal protective equipment (PPE) when mixing or spraying this product.

Keep all pets, children, and other individuals from the treated area until spray mixture is dry or for at least 24 hours.

Special Considerations

CrossCut Select may be mixed with liquid nitrogen fertilizer for foliar broadcast application. However, you will want to perform a capability test in clear jar with your selected liquid nitrogen fertilizer before mixing in a spray tank. Compatibility with liquid nitrogen fertilizers are best when they do not contain phosphorous or potassium elements.

AvailabilityOnline
Restricted UseNo
Shipping RestrictionsAK, CA, CT, HI, IN, MI, NY, OR, RI, SC, VT, WA
BrandPRIME SOURCE LLC
Keith's Pro Tips"For better control of woody plant species, cut the larger trees and treat the stumps freshly cut surface with CrossCut Select."
Product DrawbacksExcessive amounts of CrossCut Herbicide in the soil may temporarily inhibit seed germination and plant growth.
Target PestsBlack medic, Catnip, Bull thistle, Chamise, Clover, Cornflower, Buttercup annual, Cornspeedwell, Creeping beggarweed, Field bindweed, Matchweed, Prostate spurge, Purslane speedwell, Spiderwort, Spotted catsear, Horseweed (marestail), Lambsquarters common, Mustard wild, Common Ragweed, Spurge thyme-leaf, Blueweed, Bedstraw annual, Bluebur, Clover bur, Cocklebur, Croton wooly, Lettuce wild, Radish wild, Burdock, Clover sweet white, Ragwort tansy, Lettuce wild, Mustard tansy, Shepherd’s purse, Dogbane hemp, Amaranth spiny, Galinsoga hairy, Goatsbeard, Kochia, Lespedeza, Pepperweed field, Pigweed redroot, Purslane annual, Sneezeweed bitter, Sowthistle annual, Sunflower, Thistle Russian, Henbit, Wormwood biennial, Yellow rocket, Pennycress field, Buttercup tall, Chickweed mouseear, Clover white, Dandelion, Dock curly, Ironweed western, Ivy ground, Oxalis, Plantain broadleaf, Plantain narrowleaf, Vetch, Violet wild, Cinquefoil, Fleabane, Marshelder, Sesbania hemp, Carrot wild, Thistle bull, Thistle musk (nodding), Bindweed, field (suppression), Chicory (suppression), Dogfennel (suppression), Goldenrod, Horsenettle, Kudzu, Milkweed (suppression), Pepperweed perennial, Pokeweed, Sowthistle perennial, Spurge leafy, Thistle Canada, Yarrow, Alder, Ash, Beech, Birch, Blackberry, Black locust, Boneset, Cascara, Ceanothus spp., Cherry (except black), Cottonwood, Dogwood, Elderberry, Hawthorn, Honeysuckle, Maples (except bigleaf & vine), Multiflora rose, Poison ivy, Poison oak, Sassafras (top growth), Scotch broom, Sumac, Sycamore, Tamarack, Wax myrtle (top growth), White oak, Wild grape, Willow, Buckbush (suppression), Common persimmon (suppression), Elm (except winged elm), Hazel, Honeylocust (suppression), Pine (suppression), Russian olive, Salmonberry (suppression), Sweetgum, Trumpetcreeper (suppression), Virginia creeper (suppression).
Application EquipmentBackpack Sprayer, Pump Sprayer
Application MethodsBroadcast Spray, Spot Treatment
Active Ingredient2,4-D Butoxyethyl Ester 34.40% and Triclopyr 16.50%
Product TypeHerbicide
FormulationSuspended Concentrate
Application RateThe application rate for spot treatments is 1.33 to 5.33 oz. of CrossCut Select per 1,000 sq. ft. For aerial and ground broadcast applications for small weed, use 1 to 4 quarts of product per 10 gallons of water per acre. Broadcast applications for deep rooted perennial and susceptible woody species, apply 4 quarts of product per 30 gallons of water per acre. Refer to the label for specific weed application rates.
Shelf LifeCrossCut Select may last up to 3 years when stored in a dry, cool environment that is above 10°F.
YieldA quart of CrossCut Select will treat up to 8,000 sq. ft. when used at the minimum rate of 4 oz.
Use SitesOutdoors
Time to KillDepending on the density of the weed population, CrossCut Select will eliminate targeted weeds within 4 to 8 weeks.
Comparable ProductsCrossbow Specialty Herbicide
Incompatible Grass Types Bentgrass, Kikuyugrass, St Augustine, Zoysiagrass
EPA Registration #89442-31
More Information
Restricted Use No
Shipping Restrictions AK, CA, CT, HI, IN, MI, NY, OR, RI, SC, VT, WA
Availability Online
Signal Word CAUTION
Keith's Pro Tip "For better control of woody plant species, cut the larger trees and treat the stumps freshly cut surface with CrossCut Select."
Target Pests Multi Annual Bedstraw, Annual Buttercup, Annual Purslane, Annual Sowthistle, Biennial Wormwood, Bitter Sneezeweed, Black Medic, Bluebur, Blueweed, Broadleaf Plantain, Bull Thistle, Bur Clover, Burdock, Canada Thistle, Catnip, Cherry, Cinquefoil, Clover, Cocklebur, Common Ragweed, Corn Speedwell, Creeping Beggarweed, Curly Dock, Dandelion, Field Bindweed, Field Pennycress, Field Pepperweed, Fleabane, Goatsbeard, Hairy Galinsoga, Hemp Dogbane, Hemp Sesbania, Henbit, Honeysuckle, Horsenettle, Horseweed/Marestail, Kochia, Kudzu, Lambsquarters, Leafy Spurge, Lespedeza, Marshelder, Milkweed, Mouseear Chickweed, Multiflora Rose, Musk Thistle, Narrowleaf Plantain, Oxalis, Perennial Pepperweed, Perennial Sowthistle, Poison Ivy, Poison Oak, Pokeweed, Prostrate Spurge, Purslane Speedwell, Redroot Pigweed, Russian Thistle, Shepherdspurse, Spiderwort, Spiny Amaranth, Spotted Catsear, Sunflower, Sweet White Clover, Tall Buttercup, Tansy Mustard, Tansy Ragwort, Thyme-leaf Spurge, Trumpet Creeper, Virginia Creeper, Western Ironweed, White Clover, Wild Carrot, Wild Lettuce, Wild Mustard, Wild Radish, Willow, Woolly Croton, Yarrow, Yellow Rocket, Alder, Ash, Beech, Birch, Black Locust, Blackberry, Boneset, Buckbush, Cascara, Ceanothus, Chamise, Chicory, Common Persimmon, Cornflower, Cottonwood, Dogfennel, Dogwood, Elderberry, Elm, Goldenrod, Ground Ivy, Hawthorn, Hazel, Honey Locust, Maples, Matchweed, Pine, Russian Olive , Salmonberry, Sassafras, Scotch Broom, Sumac, Sweet Gum, Sycamore, Tamarack, Vetch, Wax Myrtle, White Oak, Wild Grape, Wild Violet
Time to Kill Depending on the density of the weed population, CrossCut Select will eliminate targeted weeds within 4 to 8 weeks.
Chemical Type Herbicide
Formulation Suspended Concentrate
Application Methods Broadcast Spray, Spot Treatment
Product Drawbacks Excessive amounts of CrossCut Herbicide in the soil may temporarily inhibit seed germination and plant growth.
Active Ingredient 2,4-D Butoxyethyl Ester 34.40% and Triclopyr 16.50%
Application Equipment Backpack Sprayer, Pump Sprayer
Mix Rate The application rate for spot treatments is 1.33 to 5.33 oz. of CrossCut Select per 1,000 sq. ft. For aerial and ground broadcast applications for small weed, use 1 to 4 quarts of product per 10 gallons of water per acre. Broadcast applications for deep rooted perennial and susceptible woody species, apply 4 quarts of product per 30 gallons of water per acre. Refer to the label for specific weed application rates.
Low Use Rate 0.75 oz./1,000 sq. ft.
High Use Rate 4.36 oz./1,000 sq. ft.
Use Sites Outdoors
Yield A quart of CrossCut Select will treat up to 8,000 sq. ft. when used at the minimum rate of 4 oz.
EPA Registration No. 89442-31
Shelf Life CrossCut Select may last up to 3 years when stored in a dry, cool environment that is above 10°F.
Comparable Products Crossbow Specialty Herbicide
Children or pets? No
Property Characteristics None
Questions and Answers
No Question Found
© 2024 Solutions Pest & Lawn. All Rights Reserved