BioPro ArborPlex 14-4-5
BioPro ArborPlex 14-4-5

BioPro ArborPlex 14-4-5

ECOLOGEL SOLUTIONS

BioPro ArborPlex 14-4-5

BioPro ArborPlex 14-4-5 is a powerful slow-release fertilizer that provides consistent, extended feeding to trees and shrubs.
As low as $235.96
Only %1 left
SKU
BioPro ArborPlex 14-4-5 Product Page
Min : 235.96 - Max : 235.96
+ -

BioPro ArborPlex 14-4-5, manufactured by Ecologel Solutions, is a speciality blend of nutrient solution that supplies essential micronutrients to trees and shrubs.

Enhances transplant survival with its high quality source of chelated micronutrients and easy to apply formulation.

BioPro ArborPlex 14-4-5 is a superb fertilizer that improves color, vigor, stress tolerance, and overall growth of urban trees and shrubs without consistent feedings.

Tools Needed

To use BioPro ArborPlex 14-4-5, you will need a spray rig or root injection equipment.

How to Use

  • Step 1: Determine how much BioPro ArborPlex 14-4-5 to use by measuring the square footage of the treatment area. To do this, measure the length and width of the treatment area in feet then multiply them together (length X width = square footage). Apply 2 to 3 quarts of BioPro ArborPlex 14-4-5 with 100 gallons of water for foliar feeding. For trees and shrubs, use 16 fl. oz. of product per 50 gallons of water per 1,000 sq. ft. For root zone injections, apply 1.25 gallons of product per 100 gallons of water. Refer to the product label for specific application rates.
  • Step 2: Fill the sprayer with half the amount of water, add measured amount of BioPro ArborPlex 14-4-5, then pour remaining half of water. Close the spray tank lid and shake until the solution is thoroughly mixed.
  • Step 3: Spray the BioPro ArborPlex 14-4-5 solution onto the foliage until it begins to drip off for foliar feedings. For trees, begin injections 1-3 feet out from the trunk to avoid injury to large roots and work in a grid pattern away from the tree to within 2 feet of the drip line. For shrubs, inject 4-6 inches into the soil with 18 inch spacing between injections. Apply this product 2-4 times per year or as needed.

Where to Use

Use BioPro ArborPlex 14-4-5 on urban trees and shrubs.

When to Use

Apply BioPro ArborPlex 14-4-5 at the beginning of each season when air temperatures are beneath 85 degrees Fahrenheit.

Do not foliar feed during drought conditions or when air temperature exceeds 85 degrees Fahrenheit.

Safety Information

BioPro ArborPlex 14-4-5 is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when mixing and applying this product.

Do not allow people or pets to enter treated areas until 24 hours have passed after application.

Special Considerations

ArborPlex 14-4-5 will correct depleted soils, but it is recommended to perform a soil test to see if there are other conditions such as fungi that need to be addressed.

AvailabilityOnline
Restricted UseNo
Shipping Restrictions
BrandECOLOGEL SOLUTIONS
Keith's Pro Tips"While ArborPlex 14-4-5 contains fully chelated micronutrients to enhance color and relieve deficiency symptoms. You will also need to keep up with regular water, pruning, and general plant maintenance to help maintain the plants health."
Product DrawbacksBioPro ArborPlex 14-4-5 may not perform well when temperatures exceed 85 degrees Fahrenheit.
Application EquipmentInjection System, Spray Rig
Application MethodsBroadcast Spray, Injection
Active IngredientNitrogen 14.00%, Phosphate 4.00%, Soluble Potash 5.00%, Iron 0.10%, Manganese 0.05%, and Zinc 0.05%.
Product TypeFertilizer
FormulationReady-To-Use
Application RateApply 2 to 3 quarts of BioPro ArborPlex 14-4-5 with 100 gallons of water for foliar feeding. For trees and shrubs, use 16 fl. oz. of product per 50 gallons of water per 1,000 sq. ft. For root zone injections, apply 1.25 gallons of product per 100 gallons of water.
Shelf LifeBioPro ArborPlex 14-4-5 will last up to 3 years when stored in a dry, location with temperatures between 40°-120°F. Avoid direct heat or fire. Decomposition may occur at high temperatures. Avoid freezing.
Yield2.5 gallons of BioPro ArborPlex 14-4-5 will cover up to 20,000 sq. ft.
Use SitesOutdoors
Time to KillBioPro ArborPlex 14-4-5 will take several weeks to notice effects.
Comparable ProductsArborjet PALM-jet Mg
EPA Registration #Not Regulated
More Information
Restricted Use No
Availability Online
Signal Word WARNING
Keith's Pro Tip "While ArborPlex 14-4-5 contains fully chelated micronutrients to enhance color and relieve deficiency symptoms. You will also need to keep up with regular water, pruning, and general plant maintenance to help maintain the plants health."
Time to Kill BioPro ArborPlex 14-4-5 will take several weeks to notice effects.
Chemical Type Fertilizer
Formulation Ready-To-Use
Application Methods Broadcast Spray, Injection
Product Drawbacks BioPro ArborPlex 14-4-5 may not perform well when temperatures exceed 85 degrees Fahrenheit.
Active Ingredient Nitrogen 14.00%, Phosphate 4.00%, Soluble Potash 5.00%, Iron 0.10%, Manganese 0.05%, and Zinc 0.05%.
Application Equipment Injection System, Spray Rig
Mix Rate Apply 2 to 3 quarts of BioPro ArborPlex 14-4-5 with 100 gallons of water for foliar feeding. For trees and shrubs, use 16 fl. oz. of product per 50 gallons of water per 1,000 sq. ft. For root zone injections, apply 1.25 gallons of product per 100 gallons of water.
Low Use Rate 16 oz./1,000 sq. ft.
High Use Rate 16 oz./1,000 sq. ft.
Use Sites Outdoors
Yield 2.5 gallons of BioPro ArborPlex 14-4-5 will cover up to 20,000 sq. ft.
EPA Registration No. Not Regulated
Shelf Life BioPro ArborPlex 14-4-5 will last up to 3 years when stored in a dry, location with temperatures between 40°-120°F. Avoid direct heat or fire. Decomposition may occur at high temperatures. Avoid freezing.
Comparable Products Arborjet PALM-jet Mg
Children or pets? No
Property Characteristics None
Questions and Answers
No Question Found
© 2024 Solutions Pest & Lawn. All Rights Reserved