B&G TS-297 Siphon Tube For 2 Gallon Sprayer
B&G TS-297 Siphon Tube For 2 Gallon Sprayer
This B&G TS-297 Siphon Tube replacement for the 2-gallon Sprayer is manufactured by B&G Equipment Company and is specifically sold for use as a replacement part for B&G sprayers.
The Siphon Tube is inserted into the tank and held in with the B&G Hose Adapter. If you have a clogged sprayer that isn't spraying right, it may be that the Siphon tube has a hole or is cracked. Replacing it can get your Sprayer back up and running.
Tools Needed
To use this part, you will need the appropriate 2-gallon B&G Sprayer to replace the part on and an adjustable wrench.
How to Use
- Step 1: Following the directions that come with your sprayer on replacing parts, go to the section on replacing the TS-297 Siphon Tube and follow the directions in removing the old Siphon Tube..
- Step 2: After removing the old siphon tube, input the new siphon tube and secure it, making sure to follow the instructions closely on how to do so.
- Step 3: Put your B&G Sprayer back together and you are set.
Where to Use
The B&G TS-297 Siphon Tube is meant to be used only to replace an old Siphon Tube on a 2-gallon B&G handpump sprayer.
When to Use
Replace the siphon tube when it has been damaged or you are experiencing a sprayer clog.
Safety Information
The product is safe to use when applied according to the label directions. Keep out of reach of pets or small children.
Special Considerations
After installing the siphon tube, pressure checks it to make sure that this solves your sprayer clog issue. If it doesn't it may be another part that needs replacement.
(Some B&G products may delay shipping due to being Special Order Item and may take 2-3 weeks to receive.)
Availability | Online |
Restricted Use | No |
Shipping Restrictions | |
Brand | B&G |
Keith's Pro Tips | "The Siphon tube is usually the first part that needs replacing if your B&G Sprayer is experiencing a clog or blockage when spraying. Replacing this should allow the spraying liquid to flow freely. If not, it may be another part that is the problem." |
Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
Target Pests | N/A |
Application Equipment | Pump Sprayer |
Application Methods | Installation |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | Parts/Unit |
Application Rate | N/A |
Shelf Life | N/A |
Yield | N/A |
Use Sites | Indoors, Outdoors |
Time to Kill | N/A |
Comparable Products | B&G Handheld Sprayer |
Restricted Use | No |
---|---|
Availability | Online |
Keith's Pro Tip | "The Siphon tube is usually the first part that needs replacing if your B&G Sprayer is experiencing a clog or blockage when spraying. Replacing this should allow the spraying liquid to flow freely. If not, it may be another part that is the problem." |
Time to Kill | N/A |
Chemical Type | Equipment |
Formulation | Parts/Unit |
Application Methods | Installation |
Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
Active Ingredient | N/A |
Application Equipment | Pump Sprayer |
Mix Rate | N/A |
Use Sites | Indoors, Outdoors |
Yield | N/A |
Shelf Life | N/A |
Comparable Products | B&G Handheld Sprayer |
Children or pets? | No |
Property Characteristics | None |