This B&G Seat Stem is manufactured by B&G Equipment Company and is a replacement parts for B&G Primeline sprayers. The B&G Seat Stem fits right inside the extension wand and is held in with the seat stem nut and the seat stem spring. If your extension wand is leaking from the tip or experiencing a constant drip, replacing the Seat Stem can stop the leak and restore it to previous performance.

Tools Needed

To use the B&G Seat Stem, you will need a B&G Sprayer with an Extenda-Ban Valve extension wand and two adjustable crescent wrenches.

How to Use

• Step 1: Following the manufacturer instructions, detach the valve and extension from the hose. Carefully remove the mesh strainer and squeeze the trigger to drain all the liquid from the valve.
• Step 2: Remove the tip and nozzle assembly from the end of the extension. Push the cable out of the front of the extension to expose the spring, lock nut and seat steam. Unscrew the seat stem to remove it from the extension wand tip.
• Step 3: Replace the old Seat Stem with the new seat stem and then reassemble, making sure to tighten all parts so they are secure.

Where to Use

The B&G Seat Stem is used primarily for B&G Sprayers with the extenda-ban valve. The B&G Seat Stem is held in place between the seat stem nut and the soft seat gasket.

When to Use

Use the B&G Seat Stem to repair your B&G Sprayer when your extension wand is experiencing a leak or a constant drip.

Safety Information

The B&G Seat Stem is safe to use when applied according to the label directions. Keep out of reach of pets or small children.

Special Considerations

The B&G Seat Stem is specifically for the Extenda-Ban Valve model of B&G sprayers. It will not fit with the Ban-Drip valve or XR valve.