The B&G 5850 Tip Assembly is a replacement part manufactured by B&G Equipment Company and is specifically sold for use as a replacement part for B&G sprayer wands. The 5850 Tip Assembly is an important part of the B&G sprayer wand as it helps to adjust the sprayer to different spray settings such as fine or coarse fan and 2 pin stream settings. The 5850 Tip is located on the tip of the Extenda-Ban Wand, in the multeejet tip assembly. These parts experience wear and tear over time and should be replaced on occasion to keep your sprayer performing at a high level.

Tools Needed

To use this part, you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Take the sprayer Multeejet tip assembly apart on the extenda ban valve wand. You can refer to the repair manual instructions for details on how to specifically do this.
• Step 2:After taking apart the assembly, remove the old 5850 tip assembly piece and replace with the new tip assembly.
• Step 3: Put your B&G Sprayer back together and test it out to ensure it is working properly and changing to the different spray settings seamlessly.

Where to Use

The 5850 Tip Assembly is meant to be used only for replacement on a B&G Sprayers with Extenda Ban Valves.

When to Use

Replace the 5850 Tip Assembly when it has been damaged or you are experiencing problems when changing to the different spray settings. How often this part is changed depends on how often you use the sprayer. If it is heavily used, the part wears and tears more quickly. Part should be regularly checked and replaced annually depending on usage rate.

Safety Information

Be sure to wear gloves when handling the B&G sprayer parts, as there may be residue from chemicals or buildup on the sprayer parts. Be sure to properly drain and clean the sprayer parts before performing maintenance. Keep small items like this tip assembly out of reach of pets and children as they may swallow it.

Special Considerations

Along with the 5850 Tip Assembly, it would be wise to replace all the other small parts on the B&G Sprayer rather than just a single one at one time. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time so your sprayer return back to normal functioning.