5/8 Straight Brass Hose Barb for Maruyama Pump MSD41
MARUYAMA
5/8 Straight Brass Hose Barb for Maruyama Pump MSD41
The 5/8 Straight Brass Hose Barb is a connection part for the Maruyama MSD41 Piston Pump. The part is attached to the overflow port and connects the overflow hose to the back of the tank for agitation.
As low as
$9.99
Only %1 left
SKU
5/8 Straight Brass HB for Maruyama Pump MSD41 Product Page
Min : 9.99 - Max : 9.99
+
The 5/8 Straight Brass Hose Barb is a hose barb coupler that is a necessary part used to connect the Maruyama MSD41 Piston Pump to the overflow hose when utilized as part of a professional pesticide spraying rig. This part should be ordered when you have only purchased a Maruyama MSD41 Piston Pump as it is sold seperately.
The 5/8 Straight Brass Hose Barb connects to the overflow port and is used to allow an overflow hose connected to a tank to connect with the pump for the purpose of agitation.
Tools Needed
To install the 5/8 Straight Brass Hose Barb, you will need a crescent wrench and the appropriate hosing to attach to a spraying rig unit.
How to Use
- Step 1: Make sure the spraying rig is powered off and the ball valve is in the closed position.
- Step 2: Following manual directions, attach the Straight brass hose barb to the overflow port and use a crescent wrench to tighten it until it is secure.
- Step 3: Attach the overflow hose to the Straight hose barb connect the other end of the hose to the chemical tank.
- Step 4: Make sure all other connections are secure and then power on the rig and open the valve to the tank to allow the liquid to flow to the pump and hoses.
Where to Use
The 5/8 Straight Brass Hose Barb is a connection part specifically for the Maruyama MSD41 Piston Pump. It is meant to connect to the overflow port to allow the overflow hose to attach to the port securely.
When to Use
Use the 5/8 Straight Brass Hose Barb when you have purchased a new Maruyama MSD41 Piston Pump or when your old 5/8 Straight Brass Hose Barb has been damaged.
Safety Information
The 5/8 Straight Brass Hose Barb is safe to install when done so according to the manual directions. Always use the proper PPE when operating or performing maintenance to the piston pump (safety mask, gloves, protective eyewear).
Special Considerations
If you have purchased a new Maruyama MSD41, not only is a 5/8 Straight Brass Hose Barb needed, but also a 90 degree brass hose barb and a Nylon hose barb are needed and should be installed before connecting hoses.
| Availability | Online |
| Restricted Use | No |
| Shipping Restrictions | |
| Brand | MARUYAMA |
| Keith's Pro Tips | "When you purchase a brand new Maruyama MSD41 Pump on its own, it does not come with the Straight Brass Hose Barb, 90 degree nylon hose barb, or the brass hose barb. Make sure you purchase and install all these so you can connect all your spray rig hoses to the pump." |
| Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
| Active Ingredient | N/A |
| Product Type | Equipment |
| Formulation | Parts/Unit |
| Application Rate | N/A |
| Shelf Life | N/A |
| Yield | N/A |
| Comparable Products | Nylon Hose Barb, 90 degree Brass hose barb |
2/25/23
James Parsons
Verified Buyer
It was perfect for my application. You were the only source I could find for this part.
| Restricted Use | No |
|---|---|
| Availability | Online |
| Keith's Pro Tip | "When you purchase a brand new Maruyama MSD41 Pump on its own, it does not come with the Straight Brass Hose Barb, 90 degree nylon hose barb, or the brass hose barb. Make sure you purchase and install all these so you can connect all your spray rig hoses to the pump." |
| Chemical Type | Equipment |
| Formulation | Parts/Unit |
| Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
| Active Ingredient | N/A |
| Mix Rate | N/A |
| Yield | N/A |
| Shelf Life | N/A |
| Comparable Products | Nylon Hose Barb, 90 degree Brass hose barb |
| Children or pets? | No |
| Property Characteristics | None |
Questions and Answers
