Dynaclamp 1/4" Black

Dynaclamps are designed for use with your mosquito misting system. These clamps will secure the tubing of your misting system in the desired position without crimping the tube or restricting flow.

The clamps can be easily screwed in to most surfaces and are perfect for mounting tubing along the eaves of your home, along the fence line, and many more.

Tools Needed:

The Dynaclamps need to be screwed into the surface of whatever you are mounting them to, so you will need a screw driver or a drill to do so.

How to Use:

• Step 1: Lay out the components of your misting system in the way you wish to set it up. Be sure to create even coverage over the desired area and not leave any gaps that wont be treated.
• Step 2: Connect the nozzles and copper pipes to the tubing, ensuring you have the correct length of tubing and the necessary number of nozzles.
• Step 3: Once everything is connected and placed where you desire it, secure the clamps over the tubing and screw the clams into the surface to mount it.

Where to Use:

These clamps can be used outdoors to attach the tubing of your misting system to a mountable surface, such as the eaves of your house or your fence.

When to Use:

You can use the Dynaclamps whenever you are installing a new mosquito misting system, or wish to hold your tubing in a specific location or orientation.

Safety Information:

When installing the clamps, be sure not to damage or crimp the tubing as this could cause a leak or pressure build up in the tubing.

Special Considerations:

These clamps need to be screwed into a surface. this means that it needs to be mounted on wood or a similar surface so that the screws can penetrate the surface but also have the necessary support to hold up the tubing.