TheMistAway 3/8' Inline Filter, manufactured by MistAway, is an essential replacement part for the water intake of the Mistaway Gen III & Gen II Mosquito Misting System.

It's important to note that this inline filter is for the intake on the Tankless systems and is NOT an inline filter for the 1/4" nozzle circuit. These filters should be taken apart once a year and cleaned or replaced in the part is dirty or damaged.

Tools Needed

To install the Mistaway Inline Nozzle Filters all you need is an appropriately sized piece of tubing.

How to Use

• Step 1: Cut an appropriate sized piece of tubing that is able to connect the filter to both the controller and the circuit.
• Step 2: Stick the filter on one end of the tubing, making sure it is tightly secured. Then connect the other end to the controller. Make sure that you push the tubing into the end of the filter where it's marked "in".
• Step 3: Take the end of the tubing where the filter is and connect it to the MistAway Gen III or II filter circuit.

Where to Use

The Inline Nozzle Circuit Filter 3/8" is a part specifically for the Gen III or II versions of MistAway Mosquito Misting System. It is to be connect to a tube that would connect to the MistAway controller on one end and the circuit on the other.

When to Use

Replace the MistAway Inline Nozzle Circuit Filter 3/8" when you are noticing that your nozzles are becoming clogged and not spraying misting concentrate properly. Some owners of MistAway systems prefer to change out the entire 3/8" inline water filter because it is more convenient than taking the filter apart, inspecting and cleaning it and reassembling the part.

Safety Information

MistAway Inline Nozzle Circuit Filters are safe to use when installing according to the instruction manual.

Special Considerations

It is recommended to not have any misting concentrate running in the system when changing out MistAway parts so you don't get any of the fluid on you.