Endrun Turf Herbicide, manufactured by Helena Chemical, is a selective post-emergent herbicide used for controlling a broad spectrum of broadleaf weeds on turf and ornamental lawns.

Endrun is both easy to mix and use. The three-way mixture of Dicamba, 2,4-D and MCPP is quickly absorbed by plants through their roots and interferes with the broadleaf weed's growth hormones, resulting in control in a short amount of time.

Endrun also is pre-loaded with surfactant making the formula even more effective in sticking to plants and improving uptake.

Tools Needed

To use Endrun Turf Herbicide, you will need a hand-held sprayer, backpack sprayer, or professional spray rig.

How to Use

• Step 1: Determine how much Endrun Herbicide you will need for your application by calculating the square footage of the area you wish to treat. To do this, measure (in feet) the length and width of the target area and multiply the two values (length x width = square footage). For small applications, Endrun can be applied at a rate of 1.1 to 1.5 fl. oz. per 1,000 sq. ft. in 0.5 to 5.0 gallons of water. For large volume applications, apply 3 to 4 pints of Endrun per acre in 5 to 220 gallons of water. For example, if you calculated a treatment area of 2,000 square you would need to use 2.2 to 3.0 fl oz. in 1 to 10 gallons of water.
• Step 2: Once you have properly measured your area and determined how much Endrun you will need, you are ready to create your solution. Fill your sprayer halfway with water, then add the required amount of herbicide to the tank. Replace the cap and agitate by shaking the sprayer until the Endrun solution is thoroughly mixed.
• Step 3: Apply the Endrun mixture to the target weeds you wish to treat. For best results, thoroughly cover the weeds with spray preferably on a fan nozzle setting for even coverage.

Where to Use

Endrun Turf Herbicide is designed for use to control broadleaf weeds on sod farms, turf areas and ornamental sites such as around hospitals, nursing homes, schools, museums, libraries, sport facilities, golf courses, and office buildings. Ornamental sites include turfgrass established around residences, parks, streets, retail outlets, cemeteries, industrial and institutional buildings. Finally, residential/domestic sites are defined as areas associated with the household or home life including, but not limited to apartment complexes, condominiums, and patient care areas of nursing homes, mental institutions, hospitals, or convalescent homes.

When to Use

Apply Endrun Turf when weeds are young and growing since this is when they are most vulnerable. Use this product on a calm day where wind speeds are lower than 15 mph and the temperature does not exceed 85 degrees Fahrenheit.

Safety Information

Endrun Turf Herbicide is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when mixing and applying this product.

Do not allow people or pets enter treatment areas until spray has dried or dust has settled.

Special Considerations

When using Endrun, avoid applying to St. Augustine grass during spring green-up which is the transitional period between dormancy and active growth.

Do not spray roots of ornamentals and trees. Be particularly careful applying the product within the dripline of trees and other ornamental species.