BareSpot Ureabor
BareSpot Ureabor
BareSpot Ureabor, manufactured by Proserve, is an easy to use non-selective, residual herbicide that effectively eliminates the toughest annual and perennial weeds and grasses within a single treatment. This pelleted pre-emergent product should be applied with care since it will quickly eliminate any vegetation within its vicinity for up to one year.
BareSpot Ureabor has three active ingredients sodium metaborate 49.0%, sodium chlorate 30.0%, and bromacil 1.5%. Sodium metaborate provides long-term residual control over vegetation by eliminating microorganisms within the turf and reducing their effectiveness, thus stopping these organisms from breaking down BareSpot Ureabor. Sodium cholorate will quickly burn the vegetation until its leaves and stems curl and eventually die. The third active ingredient bromacil allows BareSpot Ureabor to break down easily into the soil to effectively control deep roots of annual and perennial weeds and grasses.
Once absorbed into the targeted plant roots it will work to eliminate the foliage and root system of weeds and grasses within several days. A residual barrier will remain active in the soil to control germinating weeds and seeds. BareSpot Ureabor is an ideal herbicide to use on areas with a long growing season and soils high in organic matter.
Tools Needed
You will need either a hand or push spreader to apply BareSpot Ureabor. You may also need a water hose to wet the granules after application.
How to Use
- Step 1: Determine how much BareSpot Ureabor to use by measuring the square footage of the treatment area. To find this, you will multiply the length times the width (length X width = square footage). For acreage, take the square footage of the treatment area and divide it by 43,560 (square footage / 43,560 = acre). Apply between 1 to 1.5 lbs. of product per 100 sq. ft. for annual weed and grasses applications. For perennial weeds and grasses, apply 1.8 lbs. of product per 100 sq. ft. This product can only be applied once a calendar year and cannot exceed more than 1.8 lbs. of product per 100 sq. ft.
- Step 2: Fill your selected spreader with the appropriate amount of BareSpot Ureabor with the correct setting for your specific spreader model (check the spreader manufacturer label for details). If unsure which setting to use with your spreader, you can test your spreader settings on 100 sq. ft. of pavement. You want to avoid applying this product onto turf to avoid unnecessary damage to lawn. You are aiming to apply 1 lb. of product per 100 sq. ft., so adjust your settings until this rate is reached.
- Step 3: Begin broadcasting BareSpot Ureabor starting at the edge of the treatment area and walk all the way around the perimeter of the area at a steady pace. Then walk back and forth across the treatment area to cover the space in the middle. Water the lawn no more than inch to avoid unnecessary runoff and to active the product.
Where to Use
BareSpot Ureabor should only be used on non-crop and industrial areas like bleachers, bridge abutments, buildings, bunkers, buried cable closures, catwalks, compresor stations, cooling towers, cross connect boxes, electrical generators, fence lines, fire hydrants, plugs or walls, fuel tanks, generating plants, guardrails, helo pads, highwayand street markers, loading stations, lumber yards, microwave towers, oil and gas pipelines, oil refineries, parking lots, pump decks, railroad lines and sidings, runway lights, runways, sign posts, storage and equipment yards, utility poles and substations, vacant lots, valves and manifolds, waste lagoons or other similar non-cropped areas.
When to Use
Use BareSpot Ureabor once a year when weeds and grasses are young and actively growing. Typically, this will be at the beginning of spring.
Safety Information
BareSpot Ureabor is safe to use around children or pets when applied according to the product label. Always wear the appropriate personal protective equipment (PPE) when applying this product.
Do not allow children or pets to enter treatment area 48 hours have passed or until product has dried or settled.
Special Considerations
BareSpot Ureabor cannot be applied with a spoon, pump-feed backpack spreader, or a gravity-feed backpack spreader.
This product may not be used in any recreation areas or in and around residential homes.
Availability | Online |
Restricted Use | No |
Shipping Restrictions | 50 Pound: FL, HI, IA, IL, KA, MT, ND, NE, NV, NY, PA, UT, WI, WV |
Brand | PROSERVE |
Keith's Pro Tips | "Unlike many herbicides that must be applied repeatedly all season long, one easy application of BareSpot Ureabor in the spring will give you 1 year of control over annual and perennial weeds and grasses." |
Product Drawbacks | BareSpot Ureabor is non-selective and should not applied near desired foliage, lawn, trees, shrubs, and crops roots. If applied it may render the entire area unusable for for one year or more. |
Target Pests | Annual weeds and grasses such as sunflower, kochia, russian thistle, pigweed, crabgrass, downy brome. Perennial weeds and grasses such as Johnson grass, Bermuda grass, Dallis grass, Quack grass, Canada grass, Bindweed, and Bluegrass. Mixed annual and perennial weeds and grasses. |
Application Equipment | Gloves, Hand Spreader, Push Spreader |
Application Methods | Granular Spreading |
Active Ingredient | Sodium Metaborate 49.0% Sodium Chlorate 30.0% Bromacil 1.5% |
Product Type | Herbicide |
Formulation | Pellets |
Application Rate | Apply between 1 to 1.5 lbs. of BareSpot Ureabor per 100 sq. ft. for annual weed and grasses applications such as sunflower, kochia, russian thistle, pigweed, crabgrass, downy brome. For perennial weeds and grasses such as Johnson grass, Bermuda grass, Dallis grass, Quack grass, Canada grass, Bindweed, and Bluegrass, apply 1.8 lbs. of product per 100 sq. ft. For mixed annual and perennial weeds and grasses apply 1.8 lbs. of product per 100 sq. ft. You can apply as low as 1 lb. per 100 sq. ft. for young and rapidly growing annual weeds. |
Shelf Life | BareSpot Ureabor will last up to 3 years when stored off the floor in a warm, and dry environment away from moisture, food, and feed. |
Yield | A 50 lb. bag of BareSpot Ureabor will treat up to 5,000 sq. ft. for general weed control. |
Use Sites | Outdoors |
Time to Kill | Results with BareSpot Ureabor can be seen within several hours after first application. |
Comparable Products | Barespot Monobar Cholorate, Bromacil Bare Ground Herbicide |
EPA Registration # | 33560-47 |
Restricted Use | No |
---|---|
Shipping Restrictions | FL, HI, IA, IL, KA, MT, ND, NE, NV, NY, PA, UT, WI, WV |
Availability | Online |
Signal Word | DANGER |
Keith's Pro Tip | "Unlike many herbicides that must be applied repeatedly all season long, one easy application of BareSpot Ureabor in the spring will give you 1 year of control over annual and perennial weeds and grasses." |
Target Pests Multi | Bermudagrass, Bindweed, Bluegrass, Canada Thistle, Crabgrass, Dallisgrass, Downy Brome, Johnsongrass, Kochia, Pigweed, Quackgrass, Russian Thistle, Sunflower |
Time to Kill | Results with BareSpot Ureabor can be seen within several hours after first application. |
Chemical Type | Herbicide |
Formulation | Pellets |
Application Methods | Granular Spreading |
Product Drawbacks | BareSpot Ureabor is non-selective and should not applied near desired foliage, lawn, trees, shrubs, and crops roots. If applied it may render the entire area unusable for for one year or more. |
Active Ingredient | Sodium Metaborate 49.0% Sodium Chlorate 30.0% Bromacil 1.5% |
Application Equipment | Gloves, Hand Spreader, Push Spreader |
Mix Rate | Apply between 1 to 1.5 lbs. of BareSpot Ureabor per 100 sq. ft. for annual weed and grasses applications such as sunflower, kochia, russian thistle, pigweed, crabgrass, downy brome. For perennial weeds and grasses such as Johnson grass, Bermuda grass, Dallis grass, Quack grass, Canada grass, Bindweed, and Bluegrass, apply 1.8 lbs. of product per 100 sq. ft. For mixed annual and perennial weeds and grasses apply 1.8 lbs. of product per 100 sq. ft. You can apply as low as 1 lb. per 100 sq. ft. for young and rapidly growing annual weeds. |
Low Use Rate | 160 oz./1,000 sq. ft. |
High Use Rate | 288 oz./1,000 sq. ft. |
Use Sites | Outdoors |
Yield | A 50 lb. bag of BareSpot Ureabor will treat up to 5,000 sq. ft. for general weed control. |
EPA Registration No. | 33560-47 |
Shelf Life | BareSpot Ureabor will last up to 3 years when stored off the floor in a warm, and dry environment away from moisture, food, and feed. |
Comparable Products | Barespot Monobar Cholorate, Bromacil Bare Ground Herbicide |
Children or pets? | Yes |
Property Characteristics | None |
-
Q:is the shipping included in the price?2/28/24A:Shipping is free.
Amanda
2/29/24 -
Q:Can it be shipped to NM ?4/10/22A:BareSpot Ureabor cannot be sold or shipped to New Mexico. Each states department of agriculture regulates the use of certain chemicals within products, which may not be approved of in certain states.
Amanda Chavez
4/11/22Certified Buyer