3/8" x 1/4" Reducer Plug
3/8" x 1/4" Reducer Plug

3/8" x 1/4" Reducer Plug

MISTAWAY

3/8" x 1/4" Reducer Plug

3/8" x 1/4" Reducer Plug is a special part used on MistAway Mosquito Misting System lines and runs to convert 3/8 fittings to or from 1/4" tubing. Requires a 3/8" push-to-connect fitting.
As low as $6.99
Only %1 left
SKU
Reducer Plug Product Page
Min : 6.99 - Max : 6.99
+ -

The 3/8" x 1/4" Reducer Plug (Product#:10434) is manufactured by Mistaway and is designed to be inserted into 3/8" fittings to transform the opening from 3/8" down to 1/4". May be needed in some cases when running tubing around a property when installing a MistAway Misting System.

Mistaway in action

Tools Needed

To install the 3/8" x 1/4" Reducer Plug you may need some teflon tape to use as a sealant and a crescent wrench may also be helpful.

How to Use

  • Step 1: In your existing MistAway System nozzle and tubing setup, locate the areas where you would like to use the reducer.
  • Step 2: Once found, simply push to connect the reducer plug to the 3/8 fitting to allow for 1/4" tubing to be able to go through the line.

Where to Use

The 3/8" x 1/4" Reducer Plug can be fitted anywhere along the tubing line where you would like to allow 1/4" tubing to go through.

When to Use

The 3/8" x 1/4" Reducer Plug is great to use when you want to run a tube through and want to convert the opening from 3/8" down to 1/4" to be able to run tubing through when setting up a run for your MistAway system.

Safety Information

This product is safe to use but keep out of reach from children and pets when not installed as it is a small piece and may be swallowed.

Special Considerations

Before installing 3/8" x 1/4" Reducer Plug, measure out the length of tubing needed first, then find the locations where the plug will be most useful.

AvailabilityOnline
Restricted UseNo
BrandMISTAWAY
Keith's Pro Tips"While not required, using a sealant such as teflon tape is recommended because not only will it prevent leakage, but it will lubricate the threads letting you remove the plug easily if needed."
Product Drawbacks3/8" x 1/4" Reducer Plug requires a 3/8" push-to-connect fitting.
Target PestsMosquitoes
Application EquipmentMisting System
Application MethodsAutomatic Misting
Active IngredientN/A
Product TypeEquipment
FormulationParts/Unit
Application RateReady to use.
Shelf Life3/8" x 1/4" Reducer Plug will not expire.
Yield3/8" x 1/4" Reducer Plug will fit one system line.
Use SitesOutdoors
Time to Kill3/8" x 1/4" Reducer Plug does not kill pests.
More Information
Restricted Use No
Availability Online
Keith's Pro Tip "While not required, using a sealant such as teflon tape is recommended because not only will it prevent leakage, but it will lubricate the threads letting you remove the plug easily if needed."
Time to Kill 3/8" x 1/4" Reducer Plug does not kill pests.
Chemical Type Equipment
Formulation Parts/Unit
Application Methods Automatic Misting
Product Drawbacks 3/8" x 1/4" Reducer Plug requires a 3/8" push-to-connect fitting.
Active Ingredient N/A
Application Equipment Misting System
Mix Rate Ready to use.
Use Sites Outdoors
Yield 3/8" x 1/4" Reducer Plug will fit one system line.
Shelf Life 3/8" x 1/4" Reducer Plug will not expire.
Children or pets? No
Property Characteristics None
Questions and Answers
No Question Found
© 2024 Solutions Pest & Lawn. All Rights Reserved