Misting System Nylon Tubing 3/8 inch (Foot) - Black

3/8 Inch Black Tubing is specifically designed 3/8 inch tubing for installation on a mosquito misting system. This tubing is pliable and bends easily.

They are UV resistant and are able to do well in direct sunlight. Use it to replace worn tubing and connect to nozzles so misting fluid flows well. Specifically, you can use it for water supply to the Gen III+ (only 25ft. is used for this purpose), in large installations as a trunk line, (without nozzles.), or instead of the 1/4" when transiting over 30' without nozzles.

Tools Needed

To use Black Tubing you may need pliers or a pair of scissors to cut tubing when needed or elbows when you need the tubing to turn a corner on a building.

How to Use

• Step 1: Measure and unravel the amount of tubing you need to connect to your misting nozzles.
• Step 2: Use scissors to cut the tubing when needed.
• Step 3: Connect to misting nozzles until your system is fully connected.

Where to Use

The 3/8" black tubing can be used to connect to nozzles on an outdoor mosquito misting system or to replace worn tubing on a misting system.

When to Use

Use Black Tubing when setting up a mosquito misting system around a structure or when you need to replace or repair worn tubing on an established system.

Safety Information

The product is safe to use when applied according to label directions. Keep pets and children away from unused tubing as they can damage it or choke on tubing.

Special Considerations

Before installing Nozzles, measure out the length of tubing needed first, then find the locations where the nozzles will be most beneficial.