• Call (800) 479-6583
  • Mon-Fri 8am-5pm
  • |
  • Sat 9am-5pm
Menu

Clipper Aquatic Herbicide Flumioxazin

Free Shipping on All Orders

Clipper Herbicide by Alligare LLC is fomulated for the management of undesirable aquatic vegetation in slow moving or quiescent waters. Clipper is a fast acting contact herbicide for the control of submersed, emergent and floating aquatic weeds.

Target Pests

Clipper Herbicide is used for the control of alligator weed duckweed frog's-bit water fern water lettuce watermeal water pennywart filamentous algae coontail fanwort hydrilla hygrophila pondweed waterfern and other listed aquatic weeds.

For Use In

Clipper Herbicide is for use in bayous canals drainage ditches lakes marshes ponds and resevoirs.

Application

For surface treatments of Clipper Herbicide apply at a rate of 6 to 12 ounces of formulated product per acre plus an adjuvant approved for aquatic usage.

For subsurface treatments of Clipper Herbicide apply at a rate of an initial concentration of 200 to 400 ppb (of active ingredient) in the water column.

Coverage Area

If Clipper Herbicide is applied at the high rate for surface application each 5 pound container will treat approximately 6.67 acres.

Time to Kill

Clipper Herbicide begins to kill target weeds 2 weeks after contact but can take up to several weeks for complete control all depending on treatment area and application.

Active Ingredient

Flumioxazin 51.0%

Clipper Aquatic Herbicide Flumioxazin

What People are Saying:

"We have been using Clipper Aquatic Herbicide to control coontail in our pond on the ranch for many years. It is the cheapest thing we could find that worked." - Thomas B

 

"We have been using Clipper Aquatic Herbicide for a long time in our pond. It is the best thing we have found to control filamentous algae." - Camille L

 

Clipper Herbicide: A Tough Weed Killer

Clipper Herbicide delivers speedy and selective control of tough invasive and nuisance aquatic plants such as cabomba, watermeal, Eurasian watermilfoil, water lettuce, duckweed, giant salvinia and more. Plus, Clipper dissipates quickly from the water column and does not accumulate in sediment. And, Clipper offers reduced PPE requirements with 51% WDG formulation for easier application and handling. 

 

CLIPPER DELIVERS FANTASTIC CONTROL OF AQUATIC WEEDS

  • Fast and selective control of tough invasive and nuisance plants
  • Dissipates quickly from the water column and does not accumulate in sediment, giving it a favorable environmental profile
  • 51% WDG means reduced personal protective equipment (PPE) requirements for ease of application, transport, and handling

 

Application Tips for Clipper Herbicide

Clipper is a contact herbicide that quickly breaks down in water. Good coverage and contact time is key to getting satisfying control results. Make applications of Clipper Herbicide with sufficient volume of water according to the label. When making applications to floating or emergent weeds, apply at 6 to 12 oz per acre and mix with an adjuvant approved for aquatic sites. For subsurface applications apply Clipper at 200 to 400 ppb in the water column. Please see label for information on the effects of high pH on plant response and efficacy.

 

Precautions and Restrictions To Keep In Mind When Using Clipper Herbicide

* No restrictions for swimming, drinking, or fishing.

* DO NOT apply to intertidal or estuarine areas.

* In areas with dense weed vegetation only treat 1/2 the water body at one time and wait 10-14 days before treating the remaining area. DO NOT re-treat the same section of water within 28 days of application.

* Treated water may not be used for irrigation purposes on food crops until at least five days after application.

* Treated water may be used for irrigation purposes on turf and landscape ornamentals as outlined in the Irrigation Restrictions Following Application table below.

* DO NOT use in water utilized for crawfish farming.

* DO NOT re-treat the same section of water with Clipper more than 6 times per year.

* DO NOT exceed 400 ppb of Clipper during any one application.
 

Purchase Clipper Herbicide today and get it shipped to you FAST and for FREE!

 

CLIPPER AQUATIC HERBICIDE LABELED TO TREAT AQUATIC WEEDS

 

Having a pond or a lake, near your property can mean lots of things: fishing, summer swimming, and boat rides, however, it could also mean aquatic weeds.

 

Maintaining proper management of your pond or lake in your property is extremely important, as these water bodies can be quickly invaded by invasive aquatic weeds that include algae and duckweed, making all your favorite summer activities impossible when the lake is covered in weeds.

 

Luckily, At Solutions Pest and Lawn, we offer one of the largest selection of professional vegetation control products on the market, ranging from pre-emergent herbicides to fungicides, to aquatic herbicides we have everything you need for your vegetation control program.

 

One of the best aquatic herbicides we offer is Clipper Herbicide, a true broad-spectrum herbicide that deals with most aquatic weeds in a matter of days! 

 

WHY SHOULD I USE CLIPPER AQUATIC HERBICIDE?

 

•  Manufactured by Valent, that since 1988 has become a global leader in the discovery of crop protection and plant enhancement, this crop protection firm produces some of the best products the pest control and agricultural industry has ever seen.

 

•  This product is a broad-spectrum herbicide that controls more than 19+ species of aquatic weeds including Water Lettuce, Alligator Weed, and Filamentous algae, Watermeal, among many others.

 

•  Compromised of 51% Flumioxazin, this active ingredient inhibits protoporphyrinogen oxidase, an essential enzyme required by plants for chlorophyll biosynthesis.

 

•  This product is a fast acting contact herbicide that controls selected submersed, emergent and floating aquatic weeds, it works quickly showing results in about 2 to 3 days.

 

•  This product has no post-application restriction against the use of treated water for drinking or recreational purposes, which means you can go swimming and fishing in the treated water body after application.

 

•  This product has the added benefit of breaking down when pH levels rise above 8.5, dissipating quickly in water and not accumulating in sediment, which why it is best to apply early in the morning when water pH levels are lower.

 

•  This product comes in a 5-pound jug that should prove more than adequate for most commercial and residential jobs.

 

 Purchase Clipper Aquatic Herbicide Today And Get Free Shipping! Labeled to treat more than 19+ species of aquatic weeds!

Call To Action Button Solutions Stores

 

WHERE CAN I USE CLIPPER AQUATIC HERBICIDE?

 

This product is registered in the following states: Alabama, Arizona, Arkansas, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire
New Jersey, New Mexico, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Puerto Rico, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, Washington, DC, West Virginia, Wisconsin, and Wyoming

 

This product can be used and applied in the following bodies of water where there is limited or no outflow, including Bayous, Canals, Drainage ditches, lakes, marshes, freshwater ponds, reservoirs

 

Only apply this product to non-flowing canal water that will not be released for irrigation until 5 days after application.

 

WHAT WEEDS DOES CLIPPER AQUATIC CONTROL?

 

This product controls floating and emerged weeds through a surface application that include Alligator Weed, Frog’s-bit, Water fern, Water Lettuce, Water Pennywort, and Filamentous algae

 

This product also controls floating and submersed weeds through a subsurface application that include Coontail, Duck WeedFanwort, Hydrilla, Southern Naiad, Curlyleaf Pondweed, Illinois Pondweed, Sago Pondweed, Variable-leaf Pondweed, Water Fern, Watermeal, Eurasian Watermilfoil, and Variable-Leaf Watermilfoil.

 

HOW TO USE CLIPPER AQUATIC HERBICIDE

 

Remember that it’s the law to read the whole label including instructions, precautions, and warnings, before using or mixing this product and remember to wear the appropriate personal protective equipment stated on the label (click here to buy personal protective equipment). 

 

This product can be applied with a backpack, tank mix, or hand sprayers. Our easy to use and convenient Solutions 1 Gallon Pump Sprayer with lifetime warranty would be ideal (you can buy it here) for smaller applications or you can browse our professional tank and backpack sprayers.

 

This product can be applied by aerial application, check the label for detailed instructions on how to apply in this manner. 

 

As this a broad-spectrum aquatic herbicide, you can find detailed instructions on how to deal with your specific type of weed, consult the label before applying.

 

When applying this product to the foliage of floating or emerged aquatic weeds, mix with an adjuvant approved for use in aquatic sites. The manufacturer of this product recommends the use of a Chemical Producers and Distributors Association certified adjuvant. Mix this product with a non-ionic surfactant containing at least 80% active ingredient.

 

Before mixing your adjuvant or additives with this product a compatibility test should be performed. To do this you will add 1 pint of water to a quart jar. Then after add 1 tablespoon of this product (Clipper Herbicide) to the jar. Then you will add 4 tablespoons of your chosen additive (for exact instructions depending on the type of additive added and ratios check the label). Place the cap on the jar and invert the jar 10 times and wait 15 minutes. The final mix should be uniformly distributed and should have no floating particles if the mix has layers of oils, fine particles suspended in the mixture, or there is a coagulated texture you should question the adjuvant you have chosen.

 

To use this product as a surface application to treat floating and emerged weeds, apply at a rate of 6 to 12 ounces of product per acre. Apply in a sufficient volume of water per acre to ensure adequate coverage. If pH in the mixed solution is higher than 7, use an appropriate buffer to reduce pH to a desirable range (check the label for complete mixing instructions).

 

Clipper Herbicide may be tank mixed with 2,4-D, diquat or other registered foliar applied herbicides for enhanced control of floating and emergent weeds when used as surface application.

 

Application in the early morning hours may enhance weed control, as pH level then to rise in the afternoon hours as product breaks down and loses herbicidal effectiveness in high pH water levels (greater than 8.5)

 

Rapid decomposition of vegetation resulting from the effect of this product may result in loss of oxygen in the water. A sudden decrease in oxygen in water can result in fish suffocation. To avoid this, if aquatic vegetation is dense, treat surface weeds in sections to avoid oxygen decrease. Treat half of the water body and wait 10 to 14 days before finishing the other half. Do not-retreat the same section within 28 days after initial application.

 

To control submersed and floating weeds using subsurface application, apply at a rate of 100 to 400 ppb (part per billion of active ingredient flumioxazin) in the water column. Apply in a sufficient volume of water per acre to ensure adequate contact with targeted weeds. A subsurface Application Rate table can be found on the label, use it to determine of product needed to achieve the desired concentration at different water depths.

 

Do not exceed 400 ppb of the active ingredient during any one application.

 

When making applications to water bodies with a depth greater than 7 feet deep, do not exceed 14.8 pounds of product per surface acre. 

 

To ensure adequate coverage apply this product with weighted trailing hoses in order to place the product under the surface and throughout the biomass of aquatic vegetation. Keep swath width to a minimum in order to maximize contact with submersed aquatic vegetation. 

 

CONCLUSION

 

This powerful broad-spectrum aquatic herbicide from Valent targets more than 19+ species of aquatic weeds.

 

The powerful formulation works fast sometimes in 2 to 3 days, and degrades quickly in water and does not accumulate in the sediment.

 

It has no post-application restrictions, so you can even go swimming and fishing in the pond.

 

If you’re looking to rein under control the weeds on your pond or lake, this is the way to go

 

Purchase Clipper Aquatic Herbicide Today and Get Free Shipping! Clear your pond of those pesky aquatic weeds. 

Call To Action Button Solutions Stores

Product Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 8 answers
When is best time of year to apply Fluridone to 30acre lake to kill duckweed?
Lana W on Jul 4, 2018
BEST ANSWER: Summer I believe is best and early morning. I used it several years ago with great success. Go to the Texas A&M website and they have a lot of information....hope this helped, good luck
? Is that a gallon size container a 5 pound
Frank V on May 24, 2018
BEST ANSWER: I think so, it’s been a while since I used it. Works great. I mixed approximately 20 gallons and sprayed a 1/4 acre pond. Make sure you use a surfactant. I used allygare..
what adjuvant best for clipper?
A shopper on Mar 7, 2018
BEST ANSWER: Sorry I can’t remember the name of the surfactant, however I bought it at Solutions. The herbicide worked great. I have a 1/4 acre pond that was covered with green duckweed. Cleared it up in a few days. Go to the TAMU agrilife website and it will tell you what surfactant to use
Can clipper be used in pellet form?
James E on Sep 4, 2017
BEST ANSWER: Mixing Instructions
• Mix with water having pH of 5 to 7. If pH is higher than
7, use an appropriate buffer to reduce pH to desirable
range.
• Fill clean spray tank 1/2 full of desired level with water
and add buffering agent if necessary.
• Add the required amount of Clipper Herbicide to the
spray tank while agitating.
• Fill spray tank to desired level with water. Ensure that
Clipper Herbicide is thoroughly mixed before making
applications. Agitation should continue until spray
solution has been applied.
• Mix only the amount of spray solution that can be
applied the day of mixing. Apply Clipper Herbicide
within 12 hours of mixing.
Does clipper control filamentous algae in a duck pond?
Thomas B on Aug 23, 2017
BEST ANSWER: Yes, Clipper will control filamentous algae in a pond and a long list of other issues.

Customer Reviews

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Death to pond weeds
We have been using Clipper Aquatic Herbicide to control coontail in our pond on the ranch for many years. It is the cheapest thing we could find that worked.
August 23, 2017
Death to pond weeds
We have been using Clipper Aquatic Herbicide for a long time in our pond. It is the best thing we have found to control filamentous algae.
August 23, 2017

Contact Us

x