The PLUS-CAP, manufactured by mistaway, is a replacement part for the MistAway Gen3+ Tankless Misting System.

With the help of the PLUS-CAP, your misting system is able to mix the precise amount of water and concentrate to create a small effective batch of misting solution every time the system is activated.

The PLUS-CAP comes with no RFID technology and is speficially designed for the Gen 3+

Tools Needed

To install the PLUS-CAP you do not need any tools but you will need a screwdriver to open up the system and access the interior of the unit.

How to Use

• Step 1: Use the screwdriver to undo the controller and reposition the shroud so you can get into the system..
• Step 2: Remove the tip and measure bottle from the coupler by pressing the release button then remove the Plus Cap from the pour port..
• Step 3: Replace with the new PLUS CAP and twist it on tight and secure..
• Step 4: Reassemble the Misting unit and then test the system to make sure it is working properly.

Where to Use

The Plus Cap threads onto Tip and Measure bottle and snaps into Gen 3 coupler when you open the unit to do a refill for instance.

When to Use

Replace the PLUS-CAP when there is an issue with the misting concentrate and water in the mistaway system not being properly mixed.

Safety Information

This product is safe to use and easy to install.

Special Considerations

The Plus Cap will not work on an Original Gen III, only the Gen III+(PLUS).