Invade Hot Spot Plus

Invade Hot Spot Plus, manufactured by Rockwell Labs Ltd., is a bio-sanitization foam formulated with fast-acting enzymes and premium microbes to eat away at scum and other organic buildup as well as eliminate foul odors in indoor drains and other areas where moisture collects.

This ready-to-use aerosol product uses a potent formulation of natural citrus oil to break down and clean up smelly, organic buildup faster. Once applied, the thick foam clings to labeled surfaces, providing maximum contact for stain, debris, and odor elimination within 20 minutes.

As a versatile product, Invade Hot Spot Plus can be applied with a 360-degree valve to crack and crevice straw to clean areas between appliances where food particles hide. This green zone product is ideal for use in sensitive areas and will not damage septic systems or municipal water treatment operations when used per the label instructions.

Tools Needed

Invade Hot Spot Plus comes ready to use and includes an entire cone spray actuator and applicator straw (for drain, crack, and crevice injections).

How to Use

• Step 1: Shake the Invade Hot Spot Plus well before use. Press down on the actuator to dispense the foam. Invade Hot Spot Plus may be dispensed with the can in any orientation. To coat scummy surfaces, hold the can about 12” away from the surface and apply foam in a sweeping motion. To inject into drains, cracks, or crevices, carefully insert the included straw into the actuator.
• Step 2: To treat the carpet, simply spray the product over the stain and completely cover it with foam, but do not wipe the foam off. If applying to an existing stain, moisten the area to clean it with water. Multiple applications of Invade Hot Spot Plus may be necessary for very dark or old stains. Do not scrub or wash after application. This product works well on soda, juice, milk, wine, beer, food residue, oil, urine, vomit, and most other organic matter.
• Step 3: Invade Hot Spot Plus can be used to eliminate household odors to drains, garbage disposals, litter boxes, and trash cans. Inject directly into drains and garbage disposals. For trash cans, simply spray Hot Spot+ to coat the surface and allow it to dissipate lightly. For litter boxes, coat the base of the box, then add the average amount of litter directly on top.
• Step 4: Do not wipe up or wash off the Invade Hot Spot Plus. To be most effective, the foam should be allowed to dissipate and remain in contact with the organic debris for at least two hours.

Where to Use

Invade Hot Spot Plus can be applied to drains, where moisture and food waste may be collected. It can also be used in cracks, crevices, drains, and other areas with organic debris, including beverage fountain drip trays, beverage line bundles, along and behind peeling-away baseboards, under ice machines, and in voids around dishwashers, walk-in coolers, and tray conveyors.

Use in a well-ventilated area and avoid breathing spray mist.

Invade Hot Spot Plus can be used to clean and deodorize a variety of carpet stains, including soda, juice, milk, wine, beer, food residue, oil, urine, vomit, and most other organic matter.

This product may also control a variety of household odors from smelly drains, garbage disposals, litter boxes, trash cans, and other dirty or smelly surfaces, except food contact surfaces.

When to Use

Invade Hot Spot Plus can be used any time dirt, grease, grime, and food matter are on various surfaces that need to be cleaned. It is ideal for cleaning cracks and crevices in kitchens or sink drains with a foul odor.

Avoid using it when there is little to no ventilation in the room.

Invade Hot Spot Plus is best applied immediately after a spill while the stain is still wet.

Safety Information

Invade Hot Spot Plus is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment when applying or handling this product.

If the product contacts a direct food contact surface, rinse thoroughly before resuming food contact. Use bleach to kill spores if needed.

Keep out of reach of children and pets. Wait until treated areas are arid before allowing children and pets to enter treatment areas.

Special Considerations

Some stains may require more than one application. Always allow the foam to dissolve before wiping up the dirt and scum.

Always test Invade Hot Spot Plus on a small area of any fabric first to be sure it will not stain.