MistAway Controller - Gen 1.3
MistAway Controller - Gen 1.3 MistAway Controller - Gen 1.3

MistAway Controller - Gen 1.3

MISTAWAY

MistAway Controller - Gen 1.3

The MistAway Controller gen 1.3 is the replacement part for the drum unit when it will no longer turn on or reset. This device has a sturdy plastic casing and can be programmed to have up to 24 mist applications per day. *This is a specialty part and may not be in stock at the time of order. It may take up to 2-3 weeks to receive your order.
As low as $342.98
Only %1 left
SKU
MistAway Controller Gen 1_3 Product Page
Min : 342.98 - Max : 342.98
+ -

The MistAway Controller is the replacement part for the drum unit. This device will allow the user to program specific treatment times and duration for their misting system. Use this product when you can no longer power on the controller on your unit or reset it.

Tools Needed:

To replace the broken controller with a new one, you will need the required screwdriver, and keep the screws on the current controller to use with the replacement. Be sure to discharge any static before removing the controller.

How to Use:

  • Step 1: Remove the non-functioning controller from its housing on the misting drum. Be sure to discharge any static, and keep the screws on the faceplate for reuse.
  • Step 2: Disconnect the cables connecting the controller to the housing and attach the new controller to the cables. Press the new controller into the slot, making sure not to crimp or crush the cables underneath.
  • Step 3: Once the controller is seated properly, screw the mount in place evenly. Do not over tighten the screws.

Where to Use:

Use the MistAway controller when any generation 1 or compatible misting systems. Refer to the manufacturer's guide for a list of systems that can function with this controller.

When to Use:

You should replace a controller whenever the current controller stops functions properly. Some examples of this would be if the controller no longer powers on or it cannot be reset.

Safety Information:

When replacing the controller be sure to observe proper electrical safety. Wear proper gloves and eye protection, and make sure there is no liquid or moisture in the area

Special Considerations:

This product is made as a replacement part for certain models of the MistAway misting system. It is important to ensure that this part will work properly with your machine before purchasing it. Contact the manufacturer or an authorized technician for information regarding your device.

*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.

AvailabilityOnline
Restricted UseNo
BrandMISTAWAY
Keith's Pro TipsBe sure to observe proper safety precautions, and understand how the controller is hooked up before attempting a replacement. More damage can be caused if the repair isn't done properly.
Product DrawbacksThis product will need to be reprogrammed after installation.
Target PestsMosquitoes, Crane Flies, Flies, and more.
Application EquipmentNone Needed
Application MethodsAutomatic Misting
Active IngredientN/A
Product TypeEquipment
FormulationParts/Unit
Application RateMistAway Controller - Gen 1.3 comes ready to use and is the control system of the drum unit, it does not have a mix rate.
Shelf LifeMistAway Controller - Gen 1.3 does not expire.
YieldThis product is the control system of the drum unit, yield is determined by the misting system.
Use SitesOutdoors
Time to KillThis product is the control system of the drum unit. The time to kill is determined by what chemical is being used in the misting system.
5/5
Based on 1 reviews
  • 100%(1)
  • 0%(0)
  • 0%(0)
  • 0%(0)
  • 0%(0)
100%
9/11/21
Bill from Texas
Verified Buyer
Easy to Install
Easy to replace. Note your cycle schedules and number of nozzles. The install was quick and most time will be spent setting up the cycles, etc. My original controller's display was going out and could only be seen at night.
More Information
Restricted Use No
Availability Online
Keith's Pro Tip Be sure to observe proper safety precautions, and understand how the controller is hooked up before attempting a replacement. More damage can be caused if the repair isn't done properly.
Target Pests Multi Flies
Time to Kill This product is the control system of the drum unit. The time to kill is determined by what chemical is being used in the misting system.
Chemical Type Equipment
Formulation Parts/Unit
Application Methods Automatic Misting
Product Drawbacks This product will need to be reprogrammed after installation.
Active Ingredient N/A
Application Equipment None Needed
Mix Rate MistAway Controller - Gen 1.3 comes ready to use and is the control system of the drum unit, it does not have a mix rate.
Use Sites Outdoors
Yield This product is the control system of the drum unit, yield is determined by the misting system.
Shelf Life MistAway Controller - Gen 1.3 does not expire.
Children or pets? No
Property Characteristics None
Questions and Answers
  1. Q:When it turns on , it keeps running and does not stop in 45 secs, do I need to replace the whole control switch?
    6/4/18
    A:Please give us a call at 1-800-479-6583 to provide assistance over this issue. I have added the link for troubleshooting of this unit. http://techselfhelp.mistaway.com/

    Tina Malone

    6/6/18
    Certified Buyer
© 2024 Solutions Pest & Lawn. All Rights Reserved