Gen 3 Coupler is manufactured by Mistaway and is meant to be installed in the Gen 3+ Mosquito Misting System Unit to allow for the Misting Concentrate to move through and travel through tubing to the nozzles where they mist out and treat for mosquitoes. This coupling is easy to install and will have your misting system up and running again when replaced.

Tools Needed

To install the coupler, all you need is a zip tie and zip tie snip and some paper towels to blot out misting concentrate.

How to Use

• Step 1: Remove the insecticide concentrate bottle from the Gen III+ unit and reposition the shroud according to MistAway's specific directions.
• Step 2: Remove the old coupler but cutting the zip tie which secures the tubing and coupler together. allow the tubing and coupler to drain the fluid and catch onto the paper towel. Then twist the coupler off.
• Step 3: Insert the new coupler into the hole and spin it clockwise and then screw the nut onto the coupler. Push the tubing onto the hose barb and secure with a zip tie then return the shroud and controller to original position.

Where to Use

The coupler is meant only for the Gen III+ model of the MistAway Mosquito Misting System Unit.

When to Use

The coupler should be replaced when you are having issues with your misting concentrate being taken up by the old faulty coupler and traveling through the nozzles during misting sessions..

Safety Information

This product is safe to install but keep out of reach from children and pets.

Special Considerations

Please read the instruction manual that comes with the coupler as it gives more detailed tips and instructions than we can give you. Instructions are also found online on MistAway's official website.