(C) EFA - PCB Board w/ Spade Connectors
(C) EFA - PCB Board w/ Spade Connectors

(C) EFA - PCB Board w/ Spade Connectors

MISTAWAY

(C) EFA - PCB Board w/ Spade Connectors

This product is a replacement PCB board for the MistAway misting system.
As low as $278.00
Only %1 left
SKU
PCB Board Spade Connectors Products
Min : 278 - Max : 278
+ -

This board is a replacement PCB board for MistAway misting systems. It has Spade connectors and will work with most MistAway units.

Tools Needed:

To replace this board you will need a screwdriver or drill, and electrical safety equipment or a static-free work area to prevent damage to the circuit board.

How to Use:

  • Step 1: First you will need to remove the housing of the misting unit and remove the controller out of it's housing.
  • Step 2: Turn the control unit around and remove the four black screws in the housing, and pull the back plate away from the housing to remove the plastic and expose the circuit boards.
  • Step 3: Gently unplug the ribbon cable to disconnect the display from the top HMI chip, then unscrew the four post screws to remove the HMI Chip.
  • Step 4: Remove the four screw on the black plastic backing to allow you to remove the old PCB board and then screw on the new board.

Where to Use:

This board is made specifically for MistAway Gen 1.4 and Gen 3 misting systems, and may not work properly with other systems.

When to Use:

Use this board when the current unit in you misting system is not operating properly, or has become damage or unusable in some way.

Safety Information:

 This product does not have any harmful chemicals, but it is recommended that you observe electrical safety when replacing and handling these components.

Special Considerations:

This product is made for specific units, it is not universal. Be sure to read the manual of your device before attempting to replace your unit as it may not function properly.

AvailabilityOnline
Restricted UseNo
BrandMISTAWAY
Keith's Pro TipsThese electrical components are sensitive and should be handled and replaced with care.
Product DrawbacksThis product is only made for certain models of misting systems, so it will not functions in certain systems.
Target PestsThis product does not control pests on it's own.
Application EquipmentGloves
Application MethodsInstallation
Active IngredientN/A
Product TypeEquipment
FormulationParts/Unit
Application RateThis product does not require mixing.
Shelf LifeThis product will not expire.
YieldThis product does not have a yield.
Use SitesOutdoors
Time to KillThis product does not kill pests on it's own.
Comparable ProductsN/A
More Information
Restricted Use No
Availability Online
Keith's Pro Tip These electrical components are sensitive and should be handled and replaced with care.
Time to Kill This product does not kill pests on it's own.
Chemical Type Equipment
Formulation Parts/Unit
Application Methods Installation
Product Drawbacks This product is only made for certain models of misting systems, so it will not functions in certain systems.
Active Ingredient N/A
Application Equipment Gloves
Mix Rate This product does not require mixing.
Use Sites Outdoors
Yield This product does not have a yield.
Shelf Life This product will not expire.
Comparable Products N/A
Children or pets? No
Property Characteristics None
Questions and Answers
No Question Found
© 2024 Solutions Pest & Lawn. All Rights Reserved