• Call (800) 479-6583
  • Mon-Fri 8am-5pm
  • |
  • Sat 9am-5pm

Roller Pump Skid Sprayer- Low Profile 50gal

Free Shipping on All Orders

Solution's 50 gallon low profile pesticide sprayer is the standard for roller pump sprayers. We use a Hypro 6500-CR roller pump mated to a Honda GX-160 engine ensures high volume and pressure so you can use it for any application. Solutions pesticide spray rigs can be used as tree sprayers, agricultural sprayers, insecticide sprayers or weed spraying equipment. Please note these units may require additional charges for lift gate, residential addresses, a customer service representative will contact you for delivery.

For Use In

Tree spraying Chemical sprayer Agricultural sprayer Insecticide sprayer and Weed spraying.


Ensuring proper application of chemical is important. When using this spray rig make sure to set the correct pressure at the pump. For every 100' of hose you will lose 10 pounds of pressure from the pump reading. Most label for pesticides call for a 40 psi head pressure which means you will want the pressure gauge at the pump to read 70-80 to ensure proper application. At the rate you will get 1-2 gallons per minute out of this spray rig.

Active Ingredient

5 Reasons Our Customers Buy Our Spray Rigs:

  1. If for any reason you are not satisfied with the product will will take it back.
  2. Parts come with a 1 year warranty
  3. Our spray rigs frames come with a 5 year rust warranty
  4. Little to No Maintenance
  5. Fits in any size truck

50 Gallon Spray Tank

  • 50 gallon low profile tank

Welded Aluminum Frame

  • Will not rust
  • Will not unbolt

Cox Reel Manual Crank

Several distinct design and construction advantages contribute to the superior “buy it once” quality of Cox Reels. Once you experience our hose and cable reels, you’ll see why there are more than two million of them hard at work around the world today.

Hannay Series Reel

These exclusive features produce long-term strength, reliability, and versatility to your hose reel or cable reel:

  • Heavy-duty design and construction
  • Dual bearing and dual frame support – standard on all models
  • Heavy-gauge steel frame
  • Sealed axle bearings for smoother operation and longer life
  • One-piece axle hub assembly
  • Compact design to conserve space
  • Custom construction to meet your requirements

Standard Ready ship has a 300 foot 3/8 inch hose.

  • 600 PSI Working Pressure
  • 1800 Burst Pressure

Hypro Pumps

Diaphragm pumps are the most complete line of pumps available for spraying and pumping of herbicides, pesticides, liquid fertilizers and hard-to-handle fluids! Hypro offers a wide range of flows and pressures for slurries and suspensions. Pressures for row crop to treetop spraying applications range from 20 to 725 psi (1.4 to 50 bar) with flow rates from 3.5 to 66 gpm (13.2 to 249.8 lpm).

Low-cost maintenance and almost wear-free operation result from Hypro’s oil-bath design, premium quality, synthetic diaphragms for longer life, self-priming operation and visual, oil-level sight glass. These models can handle fluids up to 140°F (60°C) and can be run dry. Hypro diaphragm pumps can be driven by 540 rpm PTOs, 3 to 25 hp gasoline engines, or hydraulic motors.

Honda GX-160 Engine

Honda GX-160 Engine

Honda’s GX series engines are legendary for superior reliability and performance. And there’s no doubt about it: the GX160 lives up to the legend. Lower noise levels, lower vibration, and lower emissions – without sacrificing power output or performance.


  • Pressure washers

  • Commercial lawn and garden equipment

  • Tillers / cultivators

  • Generators

  • Construction / industrial equipment

  • Agricultural equipment

  • Water pumps

Roller Pump Skid Sprayer- Low Profile 50gal

Product Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 5 answers
Do you offer this rig without the Honda engine?
Brian P on Feb 25, 2018
BEST ANSWER: So you are wanting everything but the engine or with another type of engine. Yes, we can basically customize any spray rig.
how long & what diameter is the hose?
Ron S on Dec 14, 2017
BEST ANSWER: We offer both the 400 ft 3/8ths inch hose or the 300 ft 1/2 inch hose there would be no price difference.
how do you roll up the hose?? Crank or button
A shopper on Nov 10, 2017
BEST ANSWER: This is a crank for rolling up the hose, but we do have an electric roller if you would like to have them swapped out, you can call for a custom design.
What would you say are the benefits with this pump as compared to the diaphragm pump?
sheri on May 12, 2017
BEST ANSWER: The advantages of a roller pump are that it will give you a higher GPM gallons per minute than a diaphragm pump. This unit will mainly be used for the application of herbicides and agricultural chemicals but it can be used for pesticides.The roller pumps will also cost less to replace than a diaphragm pump if it is ever needed.
There is no maintenance required for a roller pump versus a diaphragm will have maintenance required at least once a year.
What are the dimensions of this unit
Steve on Apr 12, 2017
BEST ANSWER: 46" wide X 46" deep X 22" tall We also make custom rigs give us a call for a quote.

Customer Reviews

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Very happy
I wanted a special order rig due to the size of my truck. They were able to do this and ship out withing a reasonable time frame. My next rig I will order from them again.
May 12, 2017
Super at destroying large amounts of weeds
May 12, 2017
I had my spray rig customized just the way I needed it and it works great. Very happy with it.
May 11, 2017
Great Unit
Been using this unit commercially for 2 years for my small herbicide business. I have had a few issues with the diaphragms but it is used very hard often running 12-13 hours straight in a day. I really have no complaints. Great unit for a fantastic price.
May 11, 2017

Contact Us